Door trim/ rivet

[Aussiecsi]

Gents, prior to dismantling the top door trim pieces ( above the wooden inserts ) it seems that copper ( or brass ??) rivets have been used . Each rivet appears to be "flush " on both sides . Can someone please enlighten as to the process for replacing these . Thanks, Simon

 

[Honolulu]

Center punch it for a start point then drill them out to remove.

Anyone....?

 

[Aussiecsi]

Thanks Charlie, yes, removal should be straightforward ( hopefully ) but I guess I need to know size/type of rivet and if "special " rivet gun required .

 

[aearch]

remove

i just did mine
just drill them out
and reattach w/ short sheet metal screws
they are copper
use a small drill and they will spin out
i used bevel head to sit as flush as possible