E3 '72 Front Sway Bar Bushings

[Paulaner]

Hey! Does anyone have the part number or even a good parts source for the stock front sway bar bushings for a '72 E3 Bavaria?
Looking for the rectangle center ones, not the donuts on the end links.

Have scoured the usual parts sites, and RealOEM but have come up empty handed.

 

[HB Chris]

31352654110 for 17mm

https://www.fcpeuro.com/products/bmw-rubber-mounting-d-equals-17mm-31352654110

You may have 19mm, 31331106861

https://parts.bmwnorthwest.com/p/Bmw__30S-Bavaria/Rubber-Mounting/43835074/31331106861.html?srsltid=AfmBOopMRfR32SaQcXzJToBVsBGALFSYyN48g9z1KKxwKejTS6ID7DC8

 

[Paulaner]

Thanks @HB Chris

 

[HB Chris]

I just edited my post

 

[Paulaner]

Is there a year of production date that would indicate 17mm or 19mm?

 

[HB Chris]

72 used 19mm, I searched 3/72. The 2800 had no front bar, the later e3 had a front but no rear, go figure!

 

[Paulaner]

Yeah jeez, overly complicated. Best bet is to just measure the bar I have on the car. Thanks again for the part #s I should be good now

 

[mosearch]

This is from my old notes...since you requested a part #, and this is for the "stock" 19mm sway bar...Turner Motosport used to have them, but that was about 8 years back.
Side note; when I added a sway bar to the rear, I simply sourced generic poly mounting D-pads from Auto-Zone.

 

[Paulaner]

Just measured, I have a 19mm. 31331106861 it is then.

Think these will work?
19mm BLACK urethane rear sway bushing 1600, 2002, tii,Turbo 69-76 31331106861 | eBay https://share.google/MRBQVQguqr6CADB7p