E9 Parts needed/parts for trade

[2002turbo]

These are the items I NEED

1. OCAP "wishbones" ie control arms NEW
2. Set of wiper arms black
3. Set of sunshades/visors white
4. (MAYBE) a kidney grille 74 USA 3.0 CS
5. Bumper accordion rubbers esp rears but would take fronts as well, NEW OLD STOCK

7. AC fan rheostat switch

Have this stuff to trade or for sale:

1. NEW battery tiedown
2. NEW CV boots
3. Used tail lights both sides
4. Window switch NEW
6 Set of US 5mph bumpers in good shape
7. Some 2002 stuff ... will make a list and add a post
8. Some NEW front ball joint rubbers not OEM but they fit
9. 17mm lug wrench with hubcap thingie
10. Brand new AC motor/blower assembly 12V 3 speed
11. Headlamp cover hand nuts
Thanks

 

[sfdon]

got a pic of the tail lights?

 

[2002turbo]

someplace, will dig them up or take new ones

 

[2002turbo]

here are some photos of the front ball joint rubbers/boots ($13.50 per pair); the battery tiedown ($17.50); and the 17mm Heyco wrench ($65)

shipping depends on what/how much you order and how much of a hurry you are in.

still looking for stuff on my list if you prefer to trade

 

[teahead]

7. AC fan rheostat switch

Improved AC airflow with 24 Volt blower fan

Hi everyone, In the past, I've had to replace the squirrel cage blower fan on my AC console twice as the bearings have gone bad. Replacement fans are difficult to come by and this had me thinking about finding a replacement fan/motor. It turns out that fan assemblies the size of ours are used...

e9coupe.com

 

[2002turbo]

Thanks however not wanting to replace the 12v blower with a 24V unit (which I can't find on the internet); not clear which 12V switch is going to work either, footprint and control knob. Want to keep OEM appearance.

 

[2002turbo]

I can get the 12V version of the 3 speed motor/blower assy identical to the "CAT" unit from France, for $100 per unit landed in the USA (assuming a min of 5 units). So anyone wanting one, drop me a PM. This price is for advance orders only. The advantage for the built in 3 speed is you can use a simple 3 way switch instead of the failure-prone rheostat switch that was the OEM solution.

 

[Albert]

hey,

still have a/c assembly?

 

[2002turbo]

En route from France. I have one available. $100 plus ship from TX to your address, probably $20 in a large flat rate box.

 

[2002turbo]

Photos of 12V fans that fit the E9 according to a member who has been there, done that. These differ from the OEM fan/motor in that they are 3 speed motors, not CV, so you don't need the problematic rheostat switch. Any 3 pos switch will work just fine. The price is now $150, inflation/dhl/customs what can I say.

 

[2002turbo]

I also have some new oem headlight cover nuts (the ones with the plastic heads) for the flat panels at $8 per, ship for free with any other item.

 

[2002turbo]

AC fans are all sold, well I kept one for myself since I can't find the rheostat switch on my want list
I need a set of brake hoses (6), or at least the rears (4), rubber OK
I need a replacement Al wheel for my 74 CS, my spare is bent, not the turbine style.
Could also use a new or nos gas tank, US version

 

[bluecoupe30!]

AC fans are all sold, well I kept one for myself since I can't find the rheostat switch on my want list
I need a set of brake hoses (6), or at least the rears (4), rubber OK
I need a replacement Al wheel for my 74 CS, my spare is bent, not the turbine style.
Could also use a new or nos gas tank, US version

I have 1 Mahle 14 inch wheel. $75 + Shipping + PayPal fee.

 

[2002turbo]

That's what I call a turbine wheel. I want the other style (not sure what the slang is for that one). Thanks anyway.

 

[bluecoupe30!]

Well now I know what to call it. Thanks, and good luck, they are out there.

 

[eriknetherlands]

Your lug wrench is 17 mm, if I'm not mistaking e9/e3uses 19mm wrench.

Isn't it for e10 perhaps?

 

[Jim Stone]

2002Turbo, regarding your needs list I have the following that you may be interested in:
- one sun visor that should be re-stuffed
- one 1974 kidney grill that has a blemish (see pics, front /back)

 

[Jim Stone]

2002Turbo, following the thread and if I read it correctly I have a spare ‘74 CS. It was my spare but have since had the other four re-furbished. I may sell these sometime. See pic.

6J - 14” (see pics)

 

[Ohmess]

As to the fan switch, you may want to look at the discussion here, with a particular emphasis on the part @sfdon recommends: https://e9coupe.com/forum/threads/a...ator-replacement-substitute.28801/post-227075

I think this is that same part: https://www.ebay.com/itm/401037138497

 

[2002turbo]

Jim: The kidney grille may work; the wheels are the correct pattern but it's not clear whether you are selling none, one or four. Main point it must not be bent, that's the problem I am trying to fix.