E9 wheel spacers

[bmwm1]

I am in a bind and want to get this resolved asap.

I have a 74 CSL that I need 30 MM wheel spacers for. I can not get a straight answer from anyone on how to do this.

As modern cars do not have studs pressed into the hub I am not sure what to order.

Eibach makes 30 mm for the 1978 633 which I thought might work but I think it uses lug bolts.

I was hoping there are spacers that bolt on with the existing studs, then have an additional set of pressed in studs. The pictures on the web show that but I think the pics are wrong.

Any help would be greatly appreciated.

Neal

 

[Bill Riblett]

Have you contacted Ireland Engineering? They are in the Los Angles area.
They used to sell long studs and they will at least know what you are asking for.

 

[decoupe]

I think this is what you are looking for but the centre bore and lug bolts may be an issue but they may have something that will fit or suggestions - best to call with your wheel and hub specs. Cut your studs to the correct height and use cone nuts to fasten the spacer to your hub then use lug bolts to the spacer?

http://www.bmpdesign.com/product-ex...egory_id/180/search_year/1997/search_model/51

 

[couttsdesign]

You should check out the DRM series from H&R...These have the pressed in studs you are looking for and they also use your existing studs to bolt to the hub.

http://www.trakplus.com/what

 

[bmwm1]

spacers

Thanks guys.

I could not find anyone who had the HRs available.

I found a great place that custom made the correct spacers in 3 days and were exactly what was needed.

www.motorsport-tech.com

I spoke with Lenny and he got made up 33mm units with 35 mm studs.

$140