F.S. Center Console sides 80 euro

[eriknetherlands]

For sale, center console side parts. 80 euro.

Mostly ok for driver quality car. One big tear on leading edge on left side. Three of the four main corners are intact.

Perfect set for reconditioning, but not needed to drive your car.

Includes the rear fibre board, although that is better used as a template. Also the 2 floor and 1 front bracket and screws are included, with their 4 small rings.

 

[coupesport]

I think @bossrobot was on the hunt for these a few days ago.

 

[dave v. in nc]

He was looking for A/C version with hole and vent cover, but since these have good bones and metal trim pieces, could be adapted by a clever fellow. As dear old mom used to say, "you could make that..."

 

[eriknetherlands]

Bump, taking up space.

 

[alprada70]

Hi Erik, I would like to buy the console.

 

[eriknetherlands]

bump still for sale.

 

[coupedegrace]

Hi Erik,

Could you trace the rear fiber board piece and PM it to me (or just measure and send the dimensions)? Mine is missing and I'm planning on making a replacement. I can probably come up with measurements using a ruler, but it sure would be easier to start out with the dimensions.

Thanks,
Dan

 

[Denis1967]

Has anyone had a set of these side panel recovered? If so, where/by whom and how did they turn out?

 

[eriknetherlands]

Yes they have been succesfully recovered. DIY, or any decent interior shop can do it for you. It is not rocket science.

Search the site for yet another perfect, I whish I could do it myself like that tutorial by master @deQuincey .

 

[tferrer]

Yes they have been succesfully recovered. DIY, or any decent interior shop can do it for you. It is not rocket science.

Search the site for yet another perfect, I whish I could do it myself like that tutorial by master @deQuincey .

True, but they will never look like the super thin, original embossed vinyl. They will look fine, though. What's more annoying is getting them to fit correctly up tight into the notches in the alum dash trim. Almost every car you see will have a gap there that just doesn't look right..

 

[HB Chris]

True, but they will never look like the super thin, original embossed vinyl. They will look fine, though. What's more annoying is getting them to fit correctly up tight into the notches in the alum dash trim. Almost every car you see will have a gap there that just doesn't look right..

It’s because the weak particle board allows screw holes to enlarge that attach it to the heater facia I think. Everything has to be snug.

 

[deQuincey]

Yes they have been succesfully recovered. DIY, or any decent interior shop can do it for you. It is not rocket science.

Search the site for yet another perfect, I whish I could do it myself like that tutorial by master @deQuincey .

thx @eriknetherlands

here,

Lateral of central console for AC version renew process

I have learnt something about these parts, the lateral console Wood panels are in fact of two types of Wood, a poor agglomerated Wood for the non AC versión, and plywood for the AC versión these parts usually suffer when in the car, but much more prone to damage when removed, the AC versión...

e9coupe.com

 

[deQuincey]

and also this one,

renew the original central consoles of a non-AC car

just in the process of doing some interior elements, i know my car is a bit different i have to renew the lateral panels of the central console it is essentially a non-AC car but with and odd aftermarket AC that was probably installed in 1974, lateral cuts are not very nice, but it has the...

e9coupe.com

 

[Belgiumbarry]

i'm interested Erik , just waiting on somebody who "thinks" he has one.....
i need it as mine have now BIG holes after removing the roll cage

 

[eriknetherlands]

Ok, send me a pm if you want them.
Where are you in belgium? Perhaps we can meet up; I'm in Geldrop, near Eindhoven.

 

[Belgiumbarry]

sorry Erik , for the time being ( till i'm sure the car can pass tech inspection ) i repaired my console. I would not have hesitated if yours was in "better" condition. Besides , that repair reminds me of 6 years rally fun !

 

[eriknetherlands]

Sure, no problem.

Console thus still available.

 

[eriknetherlands]

Bump, still for sale.

 

[eriknetherlands]

bump, still available. Offers anyone?

 

[eriknetherlands]

I want these gone. Shame to throw them in the trash bin.
Will consider any offers.

I need to make space for some e9 surgery....