FOUND springs
- Thread starter bavagain
- Start date
If you can't find anyone on here parting any out. Get a hold of La Jolla Independent in CA. They have a nice set of lowering springs for the e3 and you shouldn't need to roll the fenders on the e3 but still check with them if your wheels/tires/offset will fit ok. They have some in stock.
Fenders on the e3 are different than the e9 clearance, meaning more clearance on e3. But double check all that before install. Price/shipping is reasonable. Good people over there. I had 14" Cromodora's with the lowering springs and never had any issues.
Similar to these if not the exact same. This is a good price even with shipping for a set from Japan:
These even have the cool inserts/cap, period correct for an e3. Also, easy to clean
. But again, if interested in the wheels, make sure these will fit the e3, not 100% sure they are the same but I think they are. I am no expert at wheel/tire fitment I assure you, as I have been finding out the hard way lately. Good luck!
Fenders on the e3 are different than the e9 clearance, meaning more clearance on e3. But double check all that before install. Price/shipping is reasonable. Good people over there. I had 14" Cromodora's with the lowering springs and never had any issues.
Similar to these if not the exact same. This is a good price even with shipping for a set from Japan:
14" Cromodora Rims 6J 22 Wheels | PCD 114.3x5 | 5x114.3 Bolt Pattern | Made in Italy
Cromodora 14" rims 6J+22 wheels PCD114.3x5. MADE IN ITALY. Asia USD380 USD250. Germany,France USD580 USD310. Canada, New Zealand, UAE USD465 USD250. USA,Australia USD465 USD310.
www.ebay.com
These even have the cool inserts/cap, period correct for an e3. Also, easy to clean
. But again, if interested in the wheels, make sure these will fit the e3, not 100% sure they are the same but I think they are. I am no expert at wheel/tire fitment I assure you, as I have been finding out the hard way lately. Good luck!
Last edited:
Hi, I'm pretty sure that I have a set used set, I'm parting a 1974 3.0s. I have sold the right strut, I just have to find the spring, pretty sure I saved it. I will be with the car at the end of the week 5/4 and will let you know then. The car is in Grass Valley CA. Ed
