Free - e3 wiper system parts, quite rusted.

[eriknetherlands]

I hate throwing things away, but this system isn't repairable, both pivot point have severe rust. In order for this to work perfectly, it would need new spindles to be machined and welded in.

For those who like it cheap, you may get an operable system if the rust is etched off, and re-zinc the whole lot. It may also still have some free play in the system after all that work.

Free for the brave of for someone who needs only one or two parts of the system.

Just pay the shipping. Located in Netherlands.

Erik.

 

[Markos]

FWIW, none of the linkages cross over to e9. The M16x1.25 threaded sleeves cross over. I actually bought a die to cleanup the threads on these guys. They tend to chafe against the sheetmetal when the linkage gets loose. You can zinc plate them and have them all nice again.

 

[eriknetherlands]

Thanks to clarify the e3-e9 cross over application.

Yeah, reasonable re use is only of the 2 -3 large metal parts, and perhaps the m16 threaded sleeve, the large flat nuts and their washers; indeed after rezincing them. The M16 threads are actually pretty ok on these parts.

 

[eriknetherlands]

The large flat nuts, rings and the M16 threaded sleeve have been donated to a local e9-er. If no takers for the E3 wiper parts they get recycled. Last chance...