Fritz's Bits - Recommendations?

Aussie3.0CS

Aussie3.0CS

Well-Known Member
Messages
92
Reaction score
0
Location
South Australia
Hi All,

I am wondering if anyone has sourced parts from Fritz's Bits in england? And if so, what were their experiences good/bad etc?

Or does anyone no anywhere else that has headers/extractors for RHD E9's?

Cheers

Chris
Aussie3.0CS
1971 3.0CS In bits and pieces
 
I asked about these a while back and think there is a thread somewhere. generally people said they had trouble with clearance around the steering box. They modified one of the pipes to clear it - not ideal really!
 
It was me that had to modify the "headers" to fit - to clear the steering column as using a manual box which changes the angle of the column. The headers are made for conventional RHD with power steering so not really a "fault" when seen in context.

Easy to deal with, quick to supply and happy to provide advice ... I recommend but you take as you find.
 
Sorry for the late reply.

I've got the whole system - the shop working on the car suggested that the mid boxes might not be properly optimised for gas flow but without tearing apart this was acknowledged to be taking a perfectionist line (vs price and the market leader made to measure!) ... wait and see. Fitted OK. Not run yet as closing out other work.
 
I have a set that was fabbed up by Damon Tweeks c. early 80's to fit my RHD E3 racer, feel free to pm if you'd like snaps to see how it can (should?) be done
 
You must log in or register to reply here.
Back
Top