Hard to find 4 x BBS Style split rims custom machined in Melbourne in the 1980's.
The race tyres currently on the rims are 235/ 40 R16. Tyres are also from the 1980's so would not use.
$3000 AUD
Located in Melbourne, Australia
Last edited:
Hard to find 4 x BBS Style split rims custom machined in Melbourne in the 1980's.
The race tyres currently on the rims are 235/ 40 R16. Tyres are also from the 1980's so would not use.
$3000 AUD
Located in Melbourne, Australia
Beyond cool!!
@Morgan , Can you verify the size of each rim? Zooming in it sure looks like a 235/55-16 tire.
You may want to post clearer pics along with proven diameter, width, PCD, and center bore size.
Also, is it known if these are three piece or two piece?
Shipping to CA may be prohibitive, but I am interested.
Cheers,
Rich
You may want to post clearer pics along with proven diameter, width, PCD, and center bore size.
Also, is it known if these are three piece or two piece?
Shipping to CA may be prohibitive, but I am interested.
Cheers,
Rich
he says above that they are 15" wheels.
That’s why I am asking for clarification/proof because typos happen. Picture looks like the tire says 16, not 15 - what do your eyes tell you?
I am interested in buying the rims, so I would prefer certainty since I cannot put my hands on them.
Have been down that road before.
Rich
Hi Rich,
sorry I made a mistake the rims are actually 16"
bore size is 73mm
Distance from inside rim edge to back plate is 118mm
total rim diameter is 439mm
total rim width is 244mm
It looks like they are in 3 pieces including hub, I will have the tyres taken off to confirm
sorry I made a mistake the rims are actually 16"
bore size is 73mm
Distance from inside rim edge to back plate is 118mm
total rim diameter is 439mm
total rim width is 244mm
It looks like they are in 3 pieces including hub, I will have the tyres taken off to confirm