FS- CSI, E9 and E3 parts

J.B.

Member
Site Donor
Messages
32
Reaction score
19
Location
Naples FL
I've gone through my garage recently and realize that I have several parts that I no longer have any use for given the modifications I've made to my car.
I'd like to see them get used rather than collect dust.
All pricing needs to have shipping added

3 liter engine 72,xxx miles. Head is still in plastic wrap
from machine shop and has been ported, polished, decked,
all new valves and guides. Bill from machine shop was
over $1200. I'll sell head separately $1000
2 used ECU's for CSI. 3.0 Si or early 530i - $20 each

1 AFM part 0 280 203 001 NIB never used $250

9 blade fan and clutch assy new never installed $125

Used Allison XR700 electronic ignition system with
Allison red coil. Needs optical trigger $ 60

used Distributor cap with high temp blue silicon wires $ 20

Used clutch slave cyl. Free

Used master cyl Free

2 used motor mounts Free

Fuel tank sending unit Free

Feel free to contact me with any questions.

J.B.
 
Sale pending on AFM and engine.
Thanks for all inquiries.
I'll post if the buyer doesn't send a deposit by the end of the week.
 
Interested on some of your parts

JB
Realizing that the post is a bit old, I am interested on the fan and clutch assembly and the fuel sending unit if they are still available. I have a 1971 2800 CS should be the same, I think. Please email me at [email protected]
Thanks
Luis
 
Back
Top