FS: Petri Steering Wheels

DrM

New Member
Messages
5
Reaction score
0
Location
Slovenia
Hi!
Are there any mods neccesary to fit the 400 Petri on a eu spec e9 1972

Any idea of international shipping cost? Europe

regards
 

floridabmx

Well-Known Member
Messages
1,056
Reaction score
378
Hi!
Are there any mods neccesary to fit the 400 Petri on a eu spec e9 1972

Any idea of international shipping cost? Europe

regards

Its all bolt on proper fitting, just the horn wont work apparently because of the contact button, as stated by others in this thread.
 

floridabmx

Well-Known Member
Messages
1,056
Reaction score
378
thank you

is there a way to get the horn issue solved ?

According to Markos,

"You need to use double stick foam tape to secure a horn ring. The lead goes through the 2003 plunger hole. The spline count is the same. You can buy a horn ring for $13 from ECS tuning."
 

Markos

Well-Known Member
Site Donor
Messages
13,369
Reaction score
7,503
Location
Seattle, WA
Nothing special about ECS tuning, I just like the photos versus the line drawings that you see on the dealers sites. You will want to use the factory steel turn signal cancellation tab that is on your steering column when you remove the factory wheel. If you buy a ring with the plastic cancellation, I would snip it off.

I actually really like this Porsche slip ring, but it's $30 (go figure).
https://www.ecstuning.com/b-genuine...99334709981/?gclid=CJqwiKGmmNQCFUuNfgodg4cC9Q

The $11 one would require snipping some plastic off with a dremel or utility knife.
https://www.ecstuning.com/b-genuine-bmw-parts/slip-ring/32331118835/

The $18 e24 one is pretty clean:
https://www.bavauto.com/catalog/pro...-1988-679338&gclid=COaKzO-mmNQCFYVhfgodAs0Ivw
 

Wladek

Well-Known Member
Messages
1,319
Reaction score
799
Location
Gdansk, POLAND
Nothing special about ECS tuning, I just like the photos versus the line drawings that you see on the dealers sites. You will want to use the factory steel turn signal cancellation tab that is on your steering column when you remove the factory wheel. If you buy a ring with the plastic cancellation, I would snip it off.

I actually really like this Porsche slip ring, but it's $30 (go figure).
https://www.ecstuning.com/b-genuine...99334709981/?gclid=CJqwiKGmmNQCFUuNfgodg4cC9Q
This Porsche slip ring is actually standard MOMO slip ring.
 
Top