fuel injection return line isn't available?

T

tomcolitt

(deceased)
Messages
289
Reaction score
4
Location
Los Angeles, CA
I can't get the CSi return line 16121113488. Is here a new part number or does the line from another model work? What are people using for their Motronic or L-jet return lines? What model year 318is were a good donor for the fuel tank pickup/ return or is there an even better option?

Thanks
 
Last edited:
Go to the bone yard and pull the lines out of a 7er.
Go to Home Depot and get a pipe bending tool.
 
There are two 6' sections that are straight running along the rockers. Use dykes and cut them out.
 
Don,

You must be jet lagged, I think you meant dike and not dyke. And how is Maui anyway, any fine island wine tasting on the agenda?

:D
 
These would probably work. I bought one new a few years ago (don't recall the specific part number or source). Since they run parallel you can use two of the same pipe.

http://parts.bmwofsouthatlanta.com/showAssembly.aspx?ukey_assembly=256800

One advantage of making a custom pipe is you can make it a bit longer at each end so that it is easier to attach the hoses, especially at the front.

Don - would you connect the two 6' pieces in the middle under the car after bending them to the right shape?
 
Whoops- I was thinking of the lesbian motorcycle parade in San Francisco.
Dykes on Bikes.

Dikes is another name for an Ozark Credit Card.
 
You must log in or register to reply here.
Back
Top