Full tool kit on BaT
- Thread starter BorgBmw
- Start date
Got a link?
No Reserve: BMW E9/E3 Tool Set and Tray
Bid for the chance to own a No Reserve: BMW E9/E3 Tool Set and Tray at auction with Bring a Trailer, the home of the best vintage and classic cars online. Lot #28,723.
bringatrailer.com
I don't post on BaT but someone should tell them the E9 clamshell is not interchangeable with the E3 Bavaria. At least that is my understanding.No Reserve: BMW E9/E3 Tool Set and Tray
Bid for the chance to own a No Reserve: BMW E9/E3 Tool Set and Tray at auction with Bring a Trailer, the home of the best vintage and classic cars online. Lot #28,723.
They are interchangeable, not one difference.
Thank you.No Reserve: BMW E9/E3 Tool Set and Tray
Bid for the chance to own a No Reserve: BMW E9/E3 Tool Set and Tray at auction with Bring a Trailer, the home of the best vintage and classic cars online. Lot #28,723.
its gonna sell for more than I paid for my car
I checked RealOEM for a 3.0 Bavaria and a 3.0CS and the PN is the same (71111102916). I didn't check all years E3 and E9 however.
Hobbycar
New Member
As an aside, the tool kit pictured matches the one in my car (Euro 3.0CSi, build date 9/73). It is not the same as P/N 71 11 1 102 916 on RealOEM, as I learned when ordering a replacement for the foam sound deadener. The foam piece, screwdriver, and water pump fliers for the kit in RealOEM are still available from BMW; only the screwdriver fits my tool kit.
BMW only sells a replacement green screwdriver, the small grey one is 2002.
The replacement green will not fit in any of the tool kits as the handle configuration isn't even close