Getrag 265 5 Speed bearing

[Maxim_d]

Hello

I've got 2 pieces for sale: FAG 540691, bmw part: 23121209323
225/ piece.
Shipping around the world (send me a message for shipping cost).

I can supply most of the bearings for BMW.

Regards,
Maxim.

 

[BuzzBomb]

He says 100€ to ship to US..
Hahahahahahahahahahahahahahahaha.

 

[buddha]

Can anyone confirm FAG 540691 as the proper NLA bearing for a G265/6? I found a different vendor who claims to have them in stock.


Sent from my iPhone using Tapatalk

 

[sfdon]

Let me know if he actually has some

 

[buddha]

Let me know if he actually has some

Are you confirming the FAG part number? Thanks.


Sent from my iPhone using Tapatalk

 

[sfdon]

It shows up in inter web as correct
Verify availability and price.

 

[nyccsi]

http://www.bmwmobiletradition-onlin...el=4131&mospid=47216&btnr=23_0650&hg=23&fg=15

 

[buddha]

http://www.bmwmobiletradition-onlin...el=4131&mospid=47216&btnr=23_0650&hg=23&fg=15

I talked to them a few days ago. They have none and cannot source them.


Sent from my iPhone using Tapatalk

 

[Bert Poliakoff]

Guys almost all bearings are standard sizes. Take the old bearing down to your friendly, local, bearing and seal supply store and I believe they can match it up. Easier and less expensive than bringing them in from Europe. IIRC, I bought the front bearing for my dogleg trans and the rear 1/2 shaft bearings this way for a good bit less than the dealer.

 

[Markos]

Guys almost all bearings are standard sizes. Take the old bearing down to your friendly, local, bearing and seal supply store and I believe they can match it up. Easier and less expensive than bringing them in from Europe. IIRC, I bought the front bearing for my dogleg trans and the rear 1/2 shaft bearings this way for a good bit less than the dealer.

Most bearings do not have a machined lip on the outer race, but the G265/6 bearing does (as seen in the pic above).

 

[sfdon]

The CR Getrag 265/5 bearings are easily had.
Bought them last week.
The OD 265/6 are a bitch to find.

 

[buddha]

It’s been 48 hrs since I requested data to include the number of units on his shelf and the amount I’d have to buy(group buy) to receive a volume discount...no response. I’ll start a new thread if he responds.


Sent from my iPhone using Tapatalk