Hazard Switch Replacement in CSi

[Cmac]

Received a new 7 prong Hazard Switch for Maxmillian Imports.
Is there an easy way to replace the switch? It looks like no slack in the wires behind the switch.
I can send a photo of from under the dash, but it looks like plugging in the 7 wires to the switch backside is blind and I may need a mirror.
Suggestions welcome.

Thank you,
CMac

 

[Arde]

Mine has a very reasonable amount of cable slack. I had to replace it and I do not recall using a mirror or spending more than a minute on the job. If you knew me you would understand why I do not use mirrors .

 

[Dlc]

My switch connects to a plug - looks like this:

This is what it looks like on the wiring diagram: