Head Light covers available NEW!

Thomas76

Thomas76

Well-Known Member
Site Donor $
Messages
1,420
Reaction score
825
Location
Michigan, USA
These were pretty hard to find used when I was rolling through my restoration, I spent so many hours making them look like new. Now you can buy them brand new at walloth, individually or a complete set.

www.wallothnesch.com

Set of covers for headlight opening in the front panel left and right side with seals and mounting screws for all models and years of production you need 1 for 1 car

Set of covers for headlight opening in the front panel left and right side with seals and mounting screws for all models and years of production you need 1 for 1 car
www.wallothnesch.com www.wallothnesch.com
 
Headlight covers in Aluminum were for CSLs but the quality offered from W/N is very poor. Compare the gaskets‘ cut out for the O ring and that of the Alu cover……. I’d say, unusable.
 

Attachments

  • B6C1F291-C6E3-4942-92D8-B96B237EAF31.jpeg
    B6C1F291-C6E3-4942-92D8-B96B237EAF31.jpeg
    148.3 KB · Views: 152
I think they are acceptable for the job they perform. Our coupes don't need Nasa accuracy for most things.
 
The covers were missing from my Coupe when I bought it in 2011. In 2016 I bought a pair of newer aluminum covers with gaskets with new WN knurled screws. The quality of the pair I bought are top notch.
 
Some of Walloth’s parts are close but not quite correct but BMW is to blame for many of these. Walloth claims that this Battery sticker is correct and maybe US stickers were smaller. I sent them our FAQ on stickers to document my assertion.
BB2A2856-3F6C-4E85-9825-D8C993F2861F.jpeg
EDEC2084-4617-4C75-A75C-38DDE1932359.jpeg
 
The foam can be taken from packing white or grey foam which can be found for free.

It is only important to use the foam or thick foil which is not soaking water (with "bubbles" closed).

Could be also to buy a sheet of special material used for seals (e.g. Elring is selling such a sheets).
 
You must log in or register to reply here.
Back
Top