Summit Racing: Part number KTL-30523 at $46.95.
Easy to install. Drill a hole for the pivot ball, put the supplied plate over the “balled” end and you are done.
RP
(Gold piece at the top is off an e30.)
Last edited:
Hood Prop
- Thread starter Patton
- Start date
Summit Racing: Part number KTL-30523 at $46.95.
Easy to install. Drill a hole for the pivot ball, put the supplied plate over the “balled” end and you are done.
RP
(Gold piece at the top is off an e30.)
Pivot ball.
RP
Mike Goble
Well-Known Member
How does it store?
Mike, nothing fancy, just a u-shaped, clip thing at 12:00 in the picture.
I own a CSi and want to install an auxilliary prop rod as a safety precaution. Can you post of picture showing how this rod folds into place? Thanks!
Check out the first photograph.
It rotates 90 degrees and lays next to the firewall on top of the little u-shaped bracket.
I hope this helps.
RP
It rotates 90 degrees and lays next to the firewall on top of the little u-shaped bracket.
I hope this helps.
RP
Good to know. Can you show a close-up of the bracket mod and how it stays attached to the hood? Thanks!