GGR
Member
Hi all,
I'm trying to remove the rear case of a 4 speed Getrag 262 to get the speedo cogs out and fit them in a Getrag 265.
I got the instructions to remove the rear case on a Getrag 265 here : http://www.koalamotorsport.com/e30m3-27-3.htm
Basically, put in second gear, take flange out, undo bolts all around and pull case. That's what I did on the 262 but the case won't come out. Looking closer, that 262 rear case has much more going on than on a 265 one: more alen bolts around the output flange, clips, pins, etc. Do I need to loosen any of those to get the case out ?
Alternatively, is there a way to get the cogs out without removing the case? I tried to pull the cog on the shaft using those dentist looking hooks, but it wouldn't budge.
Thanks in advance for the help !
I'm trying to remove the rear case of a 4 speed Getrag 262 to get the speedo cogs out and fit them in a Getrag 265.
I got the instructions to remove the rear case on a Getrag 265 here : http://www.koalamotorsport.com/e30m3-27-3.htm
Basically, put in second gear, take flange out, undo bolts all around and pull case. That's what I did on the 262 but the case won't come out. Looking closer, that 262 rear case has much more going on than on a 265 one: more alen bolts around the output flange, clips, pins, etc. Do I need to loosen any of those to get the case out ?
Alternatively, is there a way to get the cogs out without removing the case? I tried to pull the cog on the shaft using those dentist looking hooks, but it wouldn't budge.
Thanks in advance for the help !