Misc Parts

HB Chris

Moderator
Site Donor $$
Messages
19,634
Reaction score
9,125
Location
Huntington Beach, CA
I have a couple parts from my recent reorganization of my garage, all prices exclude shipping

Black armrest caps with chrome covers, very good condition $50 Pending
Front alu exhaust manifold cover $25
Driver side headlight bucket, bare $25
Blaupunkt radios, no knobs or nuts, I was able to get reception but best would be to get them refurbed, $100 each Both SOLD
Used rear tail panel fog light, bulb holder is loose, reflector excellent, $25 SOLD
 

Attachments

  • 91D1513A-3D6A-4363-94FB-BD68A0246337.jpeg
    91D1513A-3D6A-4363-94FB-BD68A0246337.jpeg
    88.6 KB · Views: 208
  • 8622F5DD-607F-4F44-8CBE-490D3B66AB2A.jpeg
    8622F5DD-607F-4F44-8CBE-490D3B66AB2A.jpeg
    94.8 KB · Views: 225
  • 85E4A09F-909F-4322-9C11-5A4932B649A8.jpeg
    85E4A09F-909F-4322-9C11-5A4932B649A8.jpeg
    121.6 KB · Views: 217
  • 00F4D076-2938-44BC-9E5E-76DA7DE2563C.jpeg
    00F4D076-2938-44BC-9E5E-76DA7DE2563C.jpeg
    117.9 KB · Views: 207
  • 13779C5E-448A-4320-A756-5DB82DC3AC47.jpeg
    13779C5E-448A-4320-A756-5DB82DC3AC47.jpeg
    105.4 KB · Views: 208
  • 0155B14B-7ACD-4105-BA4B-8C48C569ED8B.jpeg
    0155B14B-7ACD-4105-BA4B-8C48C569ED8B.jpeg
    128.1 KB · Views: 221
  • 98225A67-6132-4AA1-A83F-38B106F4A6BC.jpeg
    98225A67-6132-4AA1-A83F-38B106F4A6BC.jpeg
    138.6 KB · Views: 213
Last edited:
Looking at the headlight bucket , it is very different from mine, did they change? As you know, I had to modify mine to allow the city light bulb to fit, your bucket looks like what I turned mine into. I had no cutouts along the perimeter.
 
Looking at the headlight bucket , it is very different from mine, did they change? As you know, I had to modify mine to allow the city light bulb to fit, your bucket looks like what I turned mine into. I had no cutouts along the perimeter.
Good question, don’t remember where I found this one.
 
Looking at the headlight bucket , it is very different from mine, did they change? As you know, I had to modify mine to allow the city light bulb to fit, your bucket looks like what I turned mine into. I had no cutouts along the perimeter.
Bob--The restoration shop took mine apart and cut a hole in the silver bucket where my Hella city light spades were up against the bucket. Here are pics of the headlight assemblies hanging in the paint booth after getting the primer. I need to ask them why there are 2 holes cut in the bucket. Drew
 

Attachments

  • IMG_1583(1).jpg
    IMG_1583(1).jpg
    232.4 KB · Views: 113
  • IMG_1584(1).jpg
    IMG_1584(1).jpg
    162.5 KB · Views: 121
  • IMG_1585(1).jpg
    IMG_1585(1).jpg
    136.5 KB · Views: 120
  • IMG_1586(1).jpg
    IMG_1586(1).jpg
    179.8 KB · Views: 105
Back
Top