More parts- Brake master, rear brake backing plates SOLD

[m5bb]

Since I changed my braking system to Hydraboost I have a working master that came out of my 72 3.0CS.
I think there are two sizes of these. Not sure how to tell.

The backing plates were originals before I realized I could get new ones. They had some rust pitting but were media blasted and powder coated.

Master- $150 plus shipping.

Backing plates- $60 for the pair plus shipping.

 

[HB Chris]

It’s a 23.8 hence the 23, used with the thinner booster but I think it is the only one available.

 

[Thomas76]

I think the brake master is the earlier style up to 71 or so on the CS, that has the smaller booster. I recall buying a new one because I couldn't source a rebuild kit.

 

[coupe2800cs]

Same brake master as E10 TII 2800cs E9 I believe...

 

[m5bb]

Same brake master as E10 TII 2800cs E9 I believe...

Mine was a 71 production car.

 

[rsporsche]

and it was mounted on a big booster. Gary, i presume the backer plates are fronts.

 

[m5bb]

and it was mounted on a big booster. Gary, i presume the backer plates are fronts.

Yes the master was on a big booster but will also work on a Tii booster.
The backing plates are rear ones. Forgot to say.

 

[rsporsche]

Gary i will take the rear backing plates and the master cylinder. i don't know what is on my car, but i don't think its an e9 ...

 

[m5bb]

Gary i will take the rear backing plates and the master cylinder. i don't know what is on my car, but i don't think its an e9 ...

Backing plates are available new I'm pretty sure. Won't hurt my feelings. Brake is yours.