Mystery Brackets

A

AndyNZ

Active Member
Messages
60
Reaction score
9
Location
New Zealand
Hi everyone, having purchased an E9 already disassembled it's something of a jigsaw putting it back together. I have these brackets left over after doing a pre-paint trial fit of some essential items to ensure all holes & shell-mounted brackets are in the right place.

Any thoughts as to where they go please?

Regarding item 4, there is one of these in the photo (kindly supplied by Marc-M) looking down between the break boosters, but it only appears to be attached at one end(?) Can't seem to figure out why it's there & what it does.
 

Attachments

  • IMG_4183.jpg
    IMG_4183.jpg
    379.2 KB · Views: 164
  • IMG_4184.jpg
    IMG_4184.jpg
    330.1 KB · Views: 166
  • IMG_4185.jpg
    IMG_4185.jpg
    365.2 KB · Views: 167
  • IMG_4187.jpg
    IMG_4187.jpg
    385 KB · Views: 164
  • IMG_8862.JPG
    IMG_8862.JPG
    369.7 KB · Views: 165
Last edited:
Just a further question on this. There are two brackets in photo #4. One of them goes down between the brake boosters as shown in the last photo (I've now figured out the attachments). Where does the second bracket go please? Do our cars utilize both brackets or have I ended up with a spare?
 
Same spot, slightly different angle from my CSi. There's a small tab spot welded to the end of the bracket that bolts up to the servo, well on mine anyhow!
SDC12620.JPG
 
Thank you for your photo. I must confess I'm still having some difficulty trying to spot where the second of those ribbon type brackets (per photo #4 above) go. I've marked the obvious one in red. Is the second one where I have marked it up in green?
 

Attachments

  • SDC12620b.jpg
    SDC12620b.jpg
    491.4 KB · Views: 117
You must log in or register to reply here.
Back
Top