name this part..

bluecoupe30!

bluecoupe30!

Well-Known Member
Site Donor
Messages
2,283
Reaction score
1,446
Location
Delta, British Columbia, Canada
Drove my Coupe today and reached my destination. Then when I started it up to leave it was way down on power. All ignition connections were fine, then I noticed only 1 carb would open. (I have a pair of Weber 32/36s) The linkage piece below had come apart. Managed to wire it together and got home fine. But I cannot find this piece listed in any Weber parts diagram. Do any of you know what to call it? Thanks, Mike
SAM_3499.JPG
 
yes, turnbuckle type piece....hope to find in some bin somewhere. Tried Pierce manifolds and others but nothing just like this. Did test drive my rigged up wire fix, and I must say, drives better than it has the past several months. Perhaps this piece has been f-a-i-l-i-n-g slowly over time and finally expired. Great. Drives better now, looking forward to installing correct "whatever" piece.
 
was this a piece on the carb ... or part of the linkage? the reason i ask is that i have a weber 32/36 in a box in my garage. its actually had very little use on my 2nd 2002 and has been in a box for 25 years.
 
rsporsche said:
was this a piece on the carb ... or part of the linkage? the reason i ask is that i have a weber 32/36 in a box in my garage. its actually had very little use on my 2nd 2002 and has been in a box for 25 years.
Click to expand...
well actually connects carb to linkage. have a chance to find something locally, as I have heard back from webers.com. dropping in Wed. if no-go, will circle back and offer photo of piece in situ, perhaps this is still attached to your vintage 32/36s. Thanks
 
stphers said:
Drop by overseas Auto on 4th and main They are the local weber dealer and will probably have that part.

Thanks, Rick
Click to expand...
Hey Rick, such a great idea, that I have already spoken with Jim. I know what you mean, as a long time Weber distributor, he must have this piece.
After HBChris' comment, I looked again and found that this is in fact an original BMW part# 13111253047. Seems it is the original "connection rod" from my carbed set up when new. No wonder it finally broke. So, NLA, according to dealer, but I may have found a set of twin Zeniths that still has this piece attached.
 
You must log in or register to reply here.
Back
Top