NMNA: HRE wheels

[teahead]

Has the cool BBS E50 (???) pattern which I think would look cool:


https://www.ebay.com/itm/HRE-504-Wh...b3dd:g:fEAAAOSwIABcBaYa&LH_ItemCondition=3000

Probably would need smaller lips on the front.

 

[HB Chris]

Wouldn't 5x120.65 be a problem?

 

[Markos]

Wouldn't 5x120.65 be a problem?

Not a significant problem. They are easy enough to mount. The center bore will likely either be 70.3mm (too small) or 73.9mm (too big). So you either need to find/fabricate hub centric rings or machine the center. I honestly don’t know what runs 73.9. 120.65 are usually GM wheels, often Corvette.

Edit, they are 73.9’s. I don’t know what that is from. I’m sure @floridabmx does...

 

[floridabmx]

Jaguar perhaps.

 

[teahead]

Wobble lug nuts can be used for any pcd variation of 2mm or less