Orange trouble light in the gauge pod

[bossrobot]

What does the orange O light being on indicate ? For reference I mean the one in the Temp/Fuel pod, top left of the Oil pressure light. Mine is on/ staying on, and I am having difficulty figuring out what its for? I think it used to come on and then turn off after a bit.
Thanks

 

[Stevehose]

O is the oil pressure light, check the wire at the sender unit or replace the sender unit

 

[Bmachine]

I think it used to come on and then turn off after a bit.
Thanks

That’s what the oil pressure light does. It stays on for a few seconds until pressure goes above a certain level, probably around 10 psi depending on the sender you have.
If yours stays on, I would make sure you have enough oil and oil pressure before running that motor.

 

[teahead]

Ya, check that oil level.

Check your sending unit. Maybe bad or always grounding.

If all good, check your oil pressure with a mechanical gauge

 

[merdad]

My wire to the sending unit on the head used to come loose but stays close in contact and hence the light came on and off.

 

[bossrobot]

I will take a look. Thanks!