I pulled the electrical wire out of the contact in the base of the hub. It doesn't appear to be repairable. Any clues on where to source a replacement - how to replace it ?
Petri hub horn ring contact
- Thread starter Christopher
- Start date
can you post a picture ?
which part is the one that you need ?
i might have a replacement
Thanks DeQuincey - here's images of the position in the hub - the broken wire and the components of the contact itself. A quick search online isn't throwing anything up. Let me know if you might be able to help me out (again !) Many thanks
Just located exactly what i need at Jaymic. Thanks all the same DeQ
http://www.jaymic.com/shop/parts_02_products.asp?grp=02STS&partnumber=02ST.5500
http://www.jaymic.com/shop/parts_02_products.asp?grp=02STS&partnumber=02ST.5500
good to know that you sorted it out
i dont have that type, just the contrary, a ring in the petri !
i dont have that type, just the contrary, a ring in the petri !
Just a follow-up question: is that Petri mounted to your CS? I've never seen a contact pin mounted in the hub for an E9, only 2002s.
Yes it has been for some time. Horn always worked perfectly