PS Pump brackets wanted

Bearmw

Bearmw

Well-Known Member
Messages
212
Reaction score
88
Location
Western, MA
I am looking for the power steering front 32411274723 and rear 32411274724 mounts as found on E23 733i and 735i, E24 633i, and E28 533i models.

I need these to complete mounting my Bav PS pump on my B35 conversion.

Thanks
 
I'll check to see if I have these. I got a newer PS pump for which I also needed these brackets. You know that you'll need a different mounting plate on the side of the engine for these brackets to attach? I also found that this one upgrade (PS pump) led to a cascade of changes, needing a different pulley, and then a different hose, and then a better bracket to support it and the alternator, etc. What parts are you using for all of that?
Also, what model PS pump are you using?>
 
Got it. Makes sense. I essentially upgraded all of the "parts" - pumps, alternator, etc to a B35/E28 engine but kept my original engine, so thus the need for the different mounting bracket on my end. FWIW, I ended up finding a lot of those brackets on Ebay for a moderately-reasonable price.
 
your best bet is to find an e28 at a pick + pull. grab the pump, the bracket and the alternator brackets at the same time.
 
still available new from BMW - 129 at getbmwparts.com

the downside is the supporting plates for the PS pump are NLA
1777474027497.png
 
Having been (slightly) through your pain I will say that for the alternator and power steering pump adjustment brackets, I found the Ireland engineering bracket FAR easier to install and use than the castellated nut traveling along the toothed track option. You still need the bottom support bracket but these worked great for the top and are easily adjusted with then a lock screw.

www.iemotorsport.com

Alternator Adjuster Arm / Belt Tensioner – M20

Each
www.iemotorsport.com www.iemotorsport.com
 

Attachments

  • IMG_8593.jpeg
    IMG_8593.jpeg
    546.4 KB · Views: 9
You must log in or register to reply here.
Back
Top