I made a little drawing of the wiring on the rear window defroster switch when I disassembled the dash, but it doesn't work when I hooked it back up again.
1. Maybe it didn't work before I removed it?
2. Maybe it was wired incorrectly to begin with?
3. Maybe I made a mistake? (That has happened once before...the time I thought I was wrong but it turned out I was right )
4. Maybe the switch is broken?
I have three wires to the switch.
Brown = good ground
Green/Blue = good switched (key on) 12V through fuse #10
Black/Red = wire to left side of defroster grid (the ground wire on the right side of the grid is hooked up)
For starters, what is correct placement of the 3 wires?
1. Maybe it didn't work before I removed it?
2. Maybe it was wired incorrectly to begin with?
3. Maybe I made a mistake? (That has happened once before...the time I thought I was wrong but it turned out I was right )
4. Maybe the switch is broken?
I have three wires to the switch.
Brown = good ground
Green/Blue = good switched (key on) 12V through fuse #10
Black/Red = wire to left side of defroster grid (the ground wire on the right side of the grid is hooked up)
For starters, what is correct placement of the 3 wires?