Relays overlay stencil print.

Tony.dreamer

Raider of the lost parts
Site Donor $
Messages
770
Reaction score
193
Location
Edmond , Oklahoma
I see that some of the relays have prints on the outside . For example the load shedding relay I came across has this beautiful print in blue that shows most of the numbers and Hella logo.
I wonder what do the members think if I can make stencils that can be used to Stencil print them on the old ones that are worn off?

If so all I need is a good image to begin with. The image can be in any format as long as it can be printed on a printer ....
 
If the idea is of value to members . I can digitally produce the stencils and mail them to members at a very low cost...

Cheers
Tony
 
Last edited:
Tony,

I have a pdf of the Hella logo for a stencil if you want it. send me your e-mail via PM. The stencils I had made were on masking tape and it wasn't up to my standards to offer to others. Stan got a few from me, they weren't bad, just not great.
 
I have access to a System that I can modify to do what I want it to do. I know the system back and forth...With this set up I will end up with a paper thin sheet of plastic on one side and very very thin felt on the other side and there will be laser that cuts holes of different sizes and make the image possible. I have to practice with it and see.....
Ideally I need images of what needs to be on the relays or anything else and make a sheet of 81/2 by 11 that has all of the logos on it to reduce the cost of production...
 
Back
Top