I searched
before troubling you all, (BTW, thanks Sven, that helps) but I am hoping to get some pictures of how the console goes together, for example, the person who re-covered the side panels did a good job but is completely unfamiliar with e9's so any extra material-anywhere seems to cause fitment problems. There was a diagram I found for where the screws go in the side panels but it seemed to be for a different model. Anyhow if anyone has pictures of their rebuild and possibly the finished product it would be most appreciated.
On another note, I don't seem to be getting power to the console electric window switches; they worked when I took them out and I'm just wondering if there is a big "on/off" switch somewhere under the dash before I start hunting around as electrics are not a strong skill of mine. I posted some pics below of the general progress. The rear bumper was quite a pain (and it looked so easy).
before troubling you all, (BTW, thanks Sven, that helps) but I am hoping to get some pictures of how the console goes together, for example, the person who re-covered the side panels did a good job but is completely unfamiliar with e9's so any extra material-anywhere seems to cause fitment problems. There was a diagram I found for where the screws go in the side panels but it seemed to be for a different model. Anyhow if anyone has pictures of their rebuild and possibly the finished product it would be most appreciated.
On another note, I don't seem to be getting power to the console electric window switches; they worked when I took them out and I'm just wondering if there is a big "on/off" switch somewhere under the dash before I start hunting around as electrics are not a strong skill of mine. I posted some pics below of the general progress. The rear bumper was quite a pain (and it looked so easy).