Selling my project 74 3.0 CSI tribute "batmobile"

POLO

Member
Messages
19
Reaction score
8
Location
Texas
I am selling my 3.0 CSI project car, which I started but do to a stroke I had recently, I won't be able to complete the project. I have had the car about 20 years now and bought the car as is. I have taken the seats out among other things and there is some rust in the usual places which I was going to repair/fix. But in general the car is sound. I have an extra transmission to go along with it and before I took the fuel lines, the car ran and started perfectly. Please feel free to ask any questions that you might have. I know these cars are getting more expensive by the day and I hope this car finds a good home because it has been a blast to drive. The car is located in Cleburne, Texas. Make me a reasonable offer and you are more than welcome to check the car out as well.

I have the right to end the sell of the car at anytime.
 
Last edited:

teahead

aka "Rob"
Site Donor $
Messages
6,397
Reaction score
1,848
Location
Tacoma, WA, USA
Factory Taiga? CSi?

Can't go wrong there.

Good luck! Of course, you'll get at least $10k more for it if you can get it to start and run.
 
Top