Side window draft excluder/brush

Thomas76

Well-Known Member
Site Donor $
Messages
1,237
Reaction score
694
Location
Michigan, USA
Screenshot_20190526-121011.png
 

RTHLSS1

Well-Known Member
Site Donor $
Messages
467
Reaction score
337
Location
Slovenia

Rek

Well-Known Member
Messages
1,113
Reaction score
351
Location
Islington London England
Thats the place. It seems to come in and out of stock from time to time. Perhaps someone is trying to corner the market by going 'long' on felt strip futures?
 

RTHLSS1

Well-Known Member
Site Donor $
Messages
467
Reaction score
337
Location
Slovenia
I have checked 5 times in past few months but no stock... that is why i asked i thought you get it somewhere else.
 

HB Chris

Well-Known Member
Site Donor $$
Messages
19,418
Reaction score
8,757
Location
Huntington Beach, CA
I had the rubber seals and bought straight brush which I cut to fit the curves and used rivets, these aren’t CK seals.
 

bavbob

Well-Known Member
Site Donor
Messages
3,344
Reaction score
1,563
Location
Boston, Ma
I bought these from Coupeking. There is no metal, they are scored at one end to make the curve. I had to drill holes to line it up for the rivets. Overall came out well. They don't come with recommendations on installation.
 

mark99

Well-Known Member
Site Donor
Messages
1,505
Reaction score
260
Location
Kirkland WA
You drilled holes in the rubber? I was thinking I could just poke a hole for the rivet
Eric at CK replied, I asked him if I should glue it as well, he said something like, sure but not required
The only thing that baffles me a bit is the shape, the felt covered part has an angle, I guess just push it down where it is flat against the window
 
Top