Starter wanted for 1973 3.0cs

Richard,

you might search for a post from SFDon on this subject. if i remember correctly Don's recommendation was a starter for an 8 series ... much less expensive than a typical e9 ... and newer technology.
 
and easier to install!

rsporsche said:
Richard,

you might search for a post from SFDon on this subject. if i remember correctly Don's recommendation was a starter for an 8 series ... much less expensive than a typical e9 ... and newer technology.
Click to expand...
 
Thanks

Thanks,thanks,thanks, greatly appreciated. I looked up new starters from Bavarian Motor Works and they were only $126.00
 
Stock is outdated junk and a bioche to install and remove.
 
SR 441x is all the rage on the E24 circuit also. Have one in my Bavaria, one in my 635 and one in my M6.
 
bavbob said:
SR 441x is all the rage on the E24 circuit also. Have one in my Bavaria, one in my 635 and one in my M6.
Click to expand...

I have the SR441x in my CS along with the Odyssey 680 (half the size of a regular battery) under the rear seats. Never an issue starting and I can remove it without taking off any other components (including carbs, L Jet and B35 intakes). That alone makes this an attractive modification.
 
sfdon said:
Stock is outdated junk and a bioche to install and remove.
Click to expand...

After you buy a cheap socket, grind it down enough to fit the bolts, and remove two C-tubes and assorted hoses, the stock starter is a piece of cake to remove.....
 
Richard, no guarantee but I sent my original beast ( to the vendor listed) as a core and they accepted it.
 
You must log in or register to reply here.
Back
Top