Suspension arms

Joe90

New Member
Messages
8
Reaction score
13
Location
Ireland
Hi. Ive a 1975 CSA that Im currently getting back on the road but need to get suspensions arms for front and back. I can source the front ones but not the rear ones. Does anyone have any advice on who or where to go.

Also Carburettor repair kits, any advice welcome on what and where to.get.

Thanks

Tom
 
WN has the suspension arms for the front: https://www.wallothnesch.com/en/front-axle/bmw-2-5-cs-3-0-csl-e9/catalog-picture-31-01.html

The rears are a bushing replacement and you should be able to get from them or Jaymic.

As for carburetor rebuild kits you can get a set from @lip277 if his are still available if you have original zenith carbs. Weber parts are widely available if you have those.

 
WN has the suspension arms for the front: https://www.wallothnesch.com/en/front-axle/bmw-2-5-cs-3-0-csl-e9/catalog-picture-31-01.html

The rears are a bushing replacement and you should be able to get from them or Jaymic.

As for carburetor rebuild kits you can get a set from @lip277 if his are still available if you have original zenith carbs. Weber parts are widely available if you have those.


WN has the suspension arms for the front: https://www.wallothnesch.com/en/front-axle/bmw-2-5-cs-3-0-csl-e9/catalog-picture-31-01.html

The rears are a bushing replacement and you should be able to get from them or Jaymic.

As for carburetor rebuild kits you can get a set from @lip277 if his are still available if you have original zenith carbs. Weber parts are widely available if you have those.

Thanks so much for getting back to me. I will contact wallothnesch and Ive been in contact with lipp277.
 
You bringing some of those items to Saturday’s get-together?
Yes - if I end up being able to go. Lots of competing activities for me right now....
But I'll try.
FYI - I will have the E23 (E9 is back in Alameda at Don's)
 
Back
Top