Track Toy car being parted out

[Mario L.]

Folks,

All of these parts need to go . . as no one wants to buy the whole project and I don't want to play the ebay game . . I'll offer it here first!

http://www.vsr1.com/index.php?page=bmw-2800cs

Engine, Alpina 3.5 liter, I have a photocopy of the original install of this engine into a Euro 635CSi. The engine is apart, and consists of a block, rods, pistons, cylinder head, Alpina reground BMW camshaft, and oil pan. $2400.00

3 Weber 40 DCOE carbs with Korman intake manifold, fuel pressure regulator, throttle linkage, Authentic Alpina air box and intake elbows. Carbs were set up on a Korman Stage 2 3.5 liter with a Korman reground 300 degree cam, so carbs should be close to what the Alpina engine requires. Weber carbs have less than 500 miles use, Airbox is freshly powder coated and has not been used. $3500.00 with shipping in the lower 48 states


front windsplits are adhesive, $200

front airdam new VSR product, hand laid up fiberglass, NOT chopper gun, lighter and stronger
http://www.vsr1.com/index.php?page=e9-csl-airdam

Cobra Seats, entry level race seats, bottom mount, with hardware $300.00 each

Race harnesses, made by Crow, $65.00 each


Thank you!
Mario L.

 

[peterinfla]

pm sent.

 

[tmason]

Hi Mario
PM sent.

 

[tmason]

Thanks Mario.

 

[bwalvoord]

PM sent

Also interested in the steering wheel. Can you post a close up?

 

[gsshack]

PM sent

 

[Mario L.]

TTT

PM's answered and pics being sent out to those that asked, thank you!!

Mario

 

[Mario L.]

Editted

edited list above to remove items that have been sold
and paid for

Thank you . .

Mario L.
VSR1.com

 

[tmason]

Received my package.Thanks Mario.

 

[Mario L.]

Parting this chassis

Folks,
this car needs to go to a good home, and I need space!
Sahara tan 2800 CS 4 speed
no sunroof
needs floors on left side
would be a good car with some work, we've restored far worse chassis. find a rusted out complete donor car and you'll have all the parts to complete this . . or review my first post, some of these parts are still available . . .

Engine runs well, has new blue coil, 2 Weber 32/36 carbs, 4 Alloy wheels with 3 almost new tires.

I'm open to offers!!!

Mario L.

 

[autowerks]

Hi interested the trunk lid if not sold yet and has no rust? Thanks Joe

 

[bwalvoord]

The wheels are now on their way back home after being refurb'd by Ehrlich Wheel Works.

 

[floridabmx]

man that looks like an awesome project!

 

[Mario L.]

BUMP TTT

Folks,


http://www.vsr1.com/index.php?page=bmw-2800cs
This chassis has a running 2.8 liter with Weber carbs, 4 speed gearbox and much of the trim is stored indoors. perfect project for a DIY resto mod or dedicated track car.
I also have full race 3.0 liter engine, 45 DCOE Webers, Schrick cam, Mallory distributor, knife edged crank, H-beam rods, steel rocker arms, J&E pistons, headers. Engine has numerous seasons of track and race use, never over 7200 RPM, needs refresh, compression numbers are low, always run on Valvoline VR1 20w-50.


front airdam CSL , unknown manufacturer, painted Polaris $275.00
or one f our new ones:
http://www.vsr1.com/index.php?page=e9-csl-airdam

Cobra Seats, entry level race seats, bottom mount, with hardware $225.00 each

CS Coupe roll bar, rear section, 4 point mount with additional door bars. $350.00 bolt in


Thank you!
Mario L.

Call me if your seriously interested or desire us to combine all of this into a running package. Engine can be built to run on street.
603.228.2888
VSR1.com