I currently have two items I will not be using, and they are available for a donation to the e9 web site.
1st: A set of 8 polyurethane bushings (red) for the front sway bar connection to the wishbone arm. These are used, but still 'good' (may have a slight bit of 'set' from being installed for 20+ years. I'll pay for shipping, and for a $10 donation to e9 web site they can be yours!
2nd: A 'door' for the fuse box access. This is in very good, but not perfect condition. It has the hinge at the front lower location, and has a 'pushbutton' for latching. The push button is included, but out of the door, and it has a pin holding the latch that is only partially into the latch. Should be easy to push through, but I don't want to damage it, so will leave that to the new owner. This one will require the 'buyer' to pay for shipping (capped at $15, might be less), and a minimum of $35 donation to e9 web site. Post your donation 'offers' here. The 'auction' will end on 1/25 at midnight EST!!
1st: A set of 8 polyurethane bushings (red) for the front sway bar connection to the wishbone arm. These are used, but still 'good' (may have a slight bit of 'set' from being installed for 20+ years. I'll pay for shipping, and for a $10 donation to e9 web site they can be yours!
2nd: A 'door' for the fuse box access. This is in very good, but not perfect condition. It has the hinge at the front lower location, and has a 'pushbutton' for latching. The push button is included, but out of the door, and it has a pin holding the latch that is only partially into the latch. Should be easy to push through, but I don't want to damage it, so will leave that to the new owner. This one will require the 'buyer' to pay for shipping (capped at $15, might be less), and a minimum of $35 donation to e9 web site. Post your donation 'offers' here. The 'auction' will end on 1/25 at midnight EST!!
Attachments
Last edited: