Want to buy E9 AC face plate - found !
- Thread starter DavidPaul
- Start date
Do you want the shafts through the plate or a DIN 1 opening?
Gary
Gary
Check the classifieds. @GK-E30M3 has one for sale, but may be a parts lot. I have a repair plate that I made but it is a little small for majorly hogged out faces.
Check with @Koopman also, he may have one or no where to locate. If you find one that is hogged out, determine if a vanity plate would cover the hole. If it has the post holes you may still be able to run it. If it has a DIN cutout it shouldn’t be worth more than $200 IMO. The values of the hacked units will go up after I have a precision cut repair plate (which should cost under $50).
There is no shortage of 3D printed plates so attempt to locate real one first and if you fall short shoot me a PM.
Pretty sure @Vitaliy semenyuk has one.
Thank you
I have his face plate. I recommend that the sell the AC package complete but not my call. I have offered to print and paint one at half off for his buyer - so about $110.
Here is his, needs repair. I am fabricating precision cut aluminum repair panels but I need them to be larger.