Wanted bmw 3.0 cs/csi project Australia

Simon_D

Simon_D

Well-Known Member
Messages
86
Reaction score
96
Location
South Australia
Hi there- bit of a long shot looking for a project car in Aus for a father/son retirement resto.

Really love these cars and how they are being restored and driven.

Have lots of time to spare, and appreciate there is barely any of these around any more- even if someone has a donor car or wreck they are finished with I would be interested.

Please contact me through this forum- thanks guys.


Sent from my iPhone using Tapatalk
 
Thanks Wes-

Yeah a really good question. Really depends on the condition of the car- as I’m looking for a project I’m hoping something under 30k might turn up and if not I’ll have to come up from there.

Do have the time to take on something pretty rough/rusty if such a car is out there or even just a bare shell that someone’s parted out- just thought I’d throw it out there and see if anything turns up.

Thanks


Sent from my iPhone using Tapatalk
 
My advice - buy a complete car.
A complete car with rust issues is ideal if you have lots of time, and are looking to maybe end up on the cheaper side of buying a very nice coupe from the beginning.
Buying a wreck or a parted out (and rusty) shell will be impossible to finish cheaper than buying a very nice coupe. Parts are getting more expensive by the day, then add the cost of shipping said parts to you.
My coupe was restored the same way, a father/son project, go for it!:)
 
I forget who it was but there is a member on here who I think just finished up a CSL restoration.
They had a CS parts car that may fit the bill.
Will have a hunt around on here and see if I can find it.
You may snag a doer upper for around 30k. There was a CS I think that went through a Pickles auction here this year that went for around 34k.
All of the others I've seen have been 75k-90k (not counting private sales) for cars that still needed work.
 
I have no car to offer to the cause, but I would gladly offer one of my two sons ...

Simon_D said:
Hi there- bit of a long shot looking for a project car in Aus for a father/son retirement resto.

Sent from my iPhone using Tapatalk
Click to expand...
 
Thanks Wes I’ll follow that one up [emoji106]. Yeah I have seen your thread- looks like you are making some great progress with the build- will make an amazing car that’s for sure!


Sent from my iPhone using Tapatalk
 
unless you're building a racecar. buy a complete car for sure. theres a bunch of little expensive trim and small parts on these cars and they cost when you need them. I would suggest importing one if you're ok with LHD.
 
Yes you are right. Given there is not many e9’s in Australia I’m trying to stay as broad as possible- if I can find a complete car for restoration that’s great, but a part of me has always wanted to build up a weekend racecar for some of the local events which is why I’m open to taking on a shell or something at the rougher end as well.

I’d like to see if anything turns up locally first, but I suspect my search is likely to end up looking at an import- which is fine too

Thanks again




Sent from my iPhone using Tapatalk
 
i have a non sunroof 4spd 72 3.0cs
 

Attachments

  • DB45E28C-2DCE-4803-B4F1-39D1B98E41FC.jpeg
    DB45E28C-2DCE-4803-B4F1-39D1B98E41FC.jpeg
    358.1 KB · Views: 195
Last edited:
Simon_D said:
Hi there- bit of a long shot looking for a project car in Aus for a father/son retirement resto.

Really love these cars and how they are being restored and driven.

Have lots of time to spare, and appreciate there is barely any of these around any more- even if someone has a donor car or wreck they are finished with I would be interested.

Please contact me through this forum- thanks guys.


Sent from my iPhone using Tapatalk
Click to expand...

Just PMed


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top