Wiper Motor Re-install

[bavbob]

Is the order shown in RealOEM correct and what is the difference between a "plate=4" and a "reinforcement=3"? I got one metal plate and a matching rubber gasket. Of course no rubber cover. Plastic grommets/bushing face up or down. Yes, I took it all apart three years ago and though, no way will I forget how to put it back............................

 

[HB Chris]

The metal plate sits on the rubber reinforcement and plastic grommets fit into holes in plate so they are flush.

 

[deQuincey]

Is the order shown in RealOEM correct and what is the difference between a "plate=4" and a "reinforcement=3"? I got one metal plate and a matching rubber gasket. Of course no rubber cover. Plastic grommets/bushing face up or down. Yes, I took it all apart three years ago and though, no way will I forget how to put it back............................

bob,

your answer is some times a search under dequincey...

Lan-mechanisms windscreen wiper mechanism renewal

hi, some time ago i did a partial renewal of this system, only the motor, bit not the rest, so now my concern has been the mechanism surprised to see the axis in this condition, no rust at all, amazing i have seen these ones in terrible corroded condition sand blast, primer and finishing...

e9coupe.com

 

[deQuincey]

 

[bavbob]

deQ, I promise you that I searched for 45min and read tons of stuff and did not find your post..................................and thank you as it answers my questions.

 

[deQuincey]

deQ, I promise you that I searched for 45min and read tons of stuff and did not find your post..................................and thank you as it answers my questions.

yes, sometimes it is not that easy, but happy that ended well
regards