I have wasted hours and liters of brake fluid and cannot get working brakes on my 2800 CS. So, I need a master cylinder. Or a rebuild kit. Using a NOS master but it must be bad. I have wasted so much time on this and am very frustrated.
Hi Steve. Should be the 23.81 if I understand correctly. I can take apart the old one that was on the car and measure the bore. It also has that residual pressure valve for the rear drums, but I can work around that.What is the diameter you need? I think I have a new one that i mistakenly bought for 3L that is wrong size for mine. I’ll gratis it to you if it’s a match.
I will check tonightHi Steve. Should be the 23.81 if I understand correctly. I can take apart the old one that was on the car and measure the bore. It also has that residual pressure valve for the rear drums, but I can work around that.
Hey Chris, why don't you send it to White Post Restorations They will bore it out, sleeve it in stainless and of course rebuild it. If you want, also try Apple HydraulicsI have wasted hours and liters of brake fluid and cannot get working brakes on my 2800 CS. So, I need a master cylinder. Or a rebuild kit. Using a NOS master but it must be bad. I have wasted so much time on this and am very frustrated.