WTB Air Dam

Wes

Moderator
Site Donor $
Messages
1,628
Reaction score
1,472
Location
Tasmania, Australia
Who do we think are the best suppliers of these?
I sent a DM to Mario L. but not heard back.
Are there other quality suppliers?
Have seen a couple of threads on where not to buy one..
 

Aussiecsi

Well-Known Member
Messages
1,126
Reaction score
335
Location
Perth, Western Australia
Found it.
Can you still mount the chrome bumper over the top of the Zapracing one?

Wes, if you're looking at a CSL style air dam, you will need to do cutouts where the bumper hangars are located . I bought my air dam from Zaprace too and it's good quality ...will need some fettling around the wheel arch. Lots of info on the Forum . I bought a set of fibreglass sill covers too ...seemed like a good idea at the time as I was suffering "rust depression" :)
 
  • Like
Reactions: Wes

Wes

Moderator
Site Donor $
Messages
1,628
Reaction score
1,472
Location
Tasmania, Australia
Wes, if you're looking at a CSL style air dam, you will need to do cutouts where the bumper hangars are located . I bought my air dam from Zaprace too and it's good quality ...will need some fettling around the wheel arch. Lots of info on the Forum . I bought a set of fibreglass sill covers too ...seemed like a good idea at the time as I was suffering "rust depression" :)

I see they have at least 3 types. Which one you go with?
Love to see a pic.
 

nosmonkey

In Rust We Trust
Site Donor
Messages
1,092
Reaction score
993
Location
London, UK
Late Alpina type one on mine
dEbBr9n.jpg


rB5HCV5.jpg

rB5HCV5
 

Wes

Moderator
Site Donor $
Messages
1,628
Reaction score
1,472
Location
Tasmania, Australia
Not sure what going on but have sent Zap Racing a couple of emails and no response from [email protected]
Same for DM's to Mario. L

Anybody got a direct email for Mario or alternate contact for Zap?
 

WALTER

Well-Known Member
Site Donor
Messages
603
Reaction score
162
Location
WASHINGTON, D. C.
Thanks Barry. I used to contemplate the lightweight parts on his site a lot; good to know the parts may still be available.
 

Wes

Moderator
Site Donor $
Messages
1,628
Reaction score
1,472
Location
Tasmania, Australia
Late Alpina type one on mine
dEbBr9n.jpg



rB5HCV5.jpg

rB5HCV5


Zap racing came back to me with these versions.
threestndfs.jpg


Yours is the bottom one?
I like the middle one too. Anybody had experience with installing and putting the chrome bumper back over the top?

I'm looking for a finish/style like this:
(Ripped from google, so apologies if it's a member's car :)..

threestndfs.jpg
CS1.jpg
 

nosmonkey

In Rust We Trust
Site Donor
Messages
1,092
Reaction score
993
Location
London, UK
You shouldn't bump into any problems mounting a bumper on (pun may or may not be intended), as they mount onto the valance and I don't see it fouling the over riders on euro bumpers unless its fitted massively incorrect
 

Wes

Moderator
Site Donor $
Messages
1,628
Reaction score
1,472
Location
Tasmania, Australia
You shouldn't bump into any problems mounting a bumper on (pun may or may not be intended), as they mount onto the valance and I don't see it fouling the over riders on euro bumpers unless its fitted massively incorrect

Thanks Mate.
Going to lock in a CSL type from Zap.
He seems to know what he's on about, which makes one of us :)
 
Top