WTB. Black Plastic Surround For Exterior Rear View Mirror

Koopman

Well-Known Member
Site Donor $
Messages
2,661
Reaction score
609
Location
Uxbridge,Ma
Does anyone have or know where I can find the black plastic exterior mirror surround?
Thanks In advance.
 

Koopman

Well-Known Member
Site Donor $
Messages
2,661
Reaction score
609
Location
Uxbridge,Ma
Thanks Don. I can use a couple of those, however i really need the hard plastic trim that goes around the complete mirror glass.
Thanks
 

sfdon

Well-Known Member
Site Donor
Site Donor $$
Messages
8,152
Reaction score
4,475
Location
sfbay area
Here ya go…
4F33AC74-9F03-4323-8909-2738E734BB68.png
 

dave v. in nc

Well-Known Member
Site Donor $
Messages
3,029
Reaction score
1,204
Location
North Carolina, USA
I've done a trap mirror, but didn't think you could replace a flag...there's not a spring inside to allow the glass to push in and spring back against the seal?...or is there a way.?
 

Koopman

Well-Known Member
Site Donor $
Messages
2,661
Reaction score
609
Location
Uxbridge,Ma
I took the old trim out a small piece at a time. Very brittle so pieces were easy to break.
Once I had the top and one side removed the mirror came out easy.
Once you have the new trim back on the mirror the glass with the trim fits right in.
Of course i had a new glass installed at a local Glass Co. The cost of the new mirror glass was $37.50.
 

sfdon

Well-Known Member
Site Donor
Site Donor $$
Messages
8,152
Reaction score
4,475
Location
sfbay area
Don, Have you ever replaced these?
Actually no- I have the spare glass and the blank mirror but I have new 7 mirrors on the shelf so.... maybe later.
Critical to match replacement glass and mirror body. There appears to be 2 sizes of flag mirrors.
 

Krzysztof

Well-Known Member
Site Donor
Messages
1,571
Reaction score
754
Location
Poland
Hi,

I have seen two of these being used:

Trapezoidal shape
1685080113069.png

Rounded-corners rectangular
1685080184157.png
 
Top