rickpbaker
Member
Hi all,
I'm looking for the parts that make up the hood prop support used on the CSL cars. Specifically the prop rod (support), the bracket that is riveted to the underside of the hood, the rubber grommet (holder), the stow hanger (bow). See RealOEM diagram below with part numbers. However the bracket that is riveted to the hood isn't given a part number.
I've been told the prop rods were all hand made, same with the bracket. The support is the same as the trans vent hose carrier E3/9. I have seen the prop rod listed at 33" long.
My hope is someone out there had a CSL correct template and has made these parts before and would be willing to sell me them?
Some relevant links for anyone interested:
Support: 51231819625
Holder: 51231819628
Bow: 24111203865
The prop rod are all hand made. Same with the bracket. The support is the same as the trans vent hose carrier E3/9
I'm looking for the parts that make up the hood prop support used on the CSL cars. Specifically the prop rod (support), the bracket that is riveted to the underside of the hood, the rubber grommet (holder), the stow hanger (bow). See RealOEM diagram below with part numbers. However the bracket that is riveted to the hood isn't given a part number.
I've been told the prop rods were all hand made, same with the bracket. The support is the same as the trans vent hose carrier E3/9. I have seen the prop rod listed at 33" long.
My hope is someone out there had a CSL correct template and has made these parts before and would be willing to sell me them?
Some relevant links for anyone interested:
Bonnet support rod
Hullo , when the bonnet is closed , the support rod on my RHD car pivots from the left and lays across to the right where it is held in place by a retaining bracket of some sort ? , would anyone have a photo of the bracket? .Thanks, Merry Xmas.
e9coupe.com
CSL hood prop rubber grommet
Has anyone found a replacement for the rubber bush/grommet that sits on the hood/bonnet prop? No.13 in the diagram below http://www.realoem.com/bmw/showparts.do?model=7071&mospid=47809&btnr=41_1219&hg=41&fg=35 Also the prop holder no.14? Thanks - Rohan
e9coupe.com
Support: 51231819625
Holder: 51231819628
Bow: 24111203865
The prop rod are all hand made. Same with the bracket. The support is the same as the trans vent hose carrier E3/9
Last edited: