WTB E3 28mm front sway bar mount 31351101107

[restart]

I might as well put this bar on!

Stabilizer

Stabilizer | BMW 2500-3.3Li 2800 M30 Europe

bmwfans.info

I just need the loop bracket that hooks into the frame with a single bolt hole. Part #2


pics to illustrate

Anyone done this. I suppose if necessary I could cut, grind, weld-reinforce that later style bracket? The one in my “mark up” pic.

Cheers!

 

[ScottAndrews]

I have that part. Both right and left (as in, I have two of them). It is the same as the stock E9 bar mount.
I THINK I have a new one for may larger C-N sway bar. If so mine is yours for the packing and postage.

Do you need to original rubber bushing as well? Mine are a bit shot, but I have no need for them...

 

[restart]

If the rubber is for the 28 mm bar.. That would be awesome!
Messaging you.
Thanks Scott!

 

[restart]

The part i need Looks like this.

Pic from W+N . This is their 23 mm bracket. I might have to use that with a thinner rubber bumper?
( and for reference- the incorrect one I have)

Scott, @ScottAndrews what does your Korman mount and bushing look like? IIRC My bar is the same size is the one you may have…29mm

 

[restart]

Getting closer: