Wtb E3 Bavaria Slave
- Thread starter Filthy E3
- Start date
You are in Austria?
I've always wanted to visit Austria.
I was in Salzburg 2 years ago - it's worth a visit :razz:
Which kind of clutch slave do you have?
Which kind of clutch slave do you have?
Yep, same here, that's the expensive one. I rebuilt mine, it's easy of it's in good shape on the inside. Get an ATE rebuild kit on ebay or Mesa et al, not expensive.
Mesa Performance, they are somewheres in SoCal...Jim Stansfield, he will take care of you there
Al
ps, or if the trans is out and you need a clutch also, change to later bell housing with bolt on slave...you have to change some of the clutch components also...
Al
ps, or if the trans is out and you need a clutch also, change to later bell housing with bolt on slave...you have to change some of the clutch components also...
http://parts.bmwmonterey.com/showAs...=5811564&ukey_category=51512&assembly=21_0127
It would be Item #10 yes?
Question given that the kit is the same for both... could I just buy a slave from Sachs SH6010 (bolt on model) and take it apart and use the components??
have these two, for sale, the hose is no more available
freshly renewed set, repainted, all new seals, rubber boots, bolts, nuts, washers, and so on (using ATE products)
PM me if interested
freshly renewed set, repainted, all new seals, rubber boots, bolts, nuts, washers, and so on (using ATE products)
PM me if interested
have these two, for sale, the hose is no more available
freshly renewed set, repainted, all new seals, rubber boots, bolts, nuts, washers, and so on (using ATE products)
PM me if interested
Pm'ed thank you!
Search Penske, the BMW Monterey site does not list all parts or part numbers. There is another #10 - part # 21521103191 which is NLA for this particular cylinder. None on eBay right now. The other one you mentioned will likely not fit.
So if DeQ will sell you his, that's a good option.
So if DeQ will sell you his, that's a good option.