Hey all, a local friend of mine not on this forum just picked up a very original e3 and is looking for a new/replacement windshield gasket. Looks like it has some kind of wide trim profile? Any help or part would be appreciated!
I've been working with some individuals on this site to acquire E3 front & rear windshields for a '70 Series I E3/2800. Along the way, I've learned a fair amount about variations on the E3 window chrome. My vehicle uses the thin gaskets which are quite difficult to locate.
I think it would be quite helpful if you can identify which model of E3 your friend has so that you can locate the proper gasket (thin - Series I or thick - Series II & III).
I'm posting this in the E9 subforum, but it applies to both E3s and E9s
I have been a little surprised about the threads on expensive E3 and E9 windshields and the need to source them from Europe.
Here is my story...
I have a local guy that is an experienced installer, has time with a major shop, likes to do the old cars, but now just does it on the side. He is also a friend and neighbor. He has done several collector cars for me. He did my Bavaria....
I called him when I finally had the front and rear seals and asked him to find me a windshield. No problem. He had...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.