WTB e9 CSi parts

Hi RnF,

Hollar if you are still seeking a tank, I have this one 55L with a sender collecting dust.

I am in the Sac/Jackson area.

-shanon
 

Attachments

  • E9 sml tank.jpg
    E9 sml tank.jpg
    249.8 KB · Views: 165
Updated the list!
Thanks to all that have helped fulfill the list so far!
Weathers breaking so hopefully be more active on the coupe.
 
I have 4 old brass overflow tanks which are likely leaking.
I can get them desoldered, glass bead blasted and resoldered and pressure tested, and 2k black painted.
They would be show quality and priced accordingly.
Shipping from the Netherlands would be about +25 euro. Pm me for details.
Erik
 
eriknetherlands said:
I have 4 old brass overflow tanks which are likely leaking.
I can get them desoldered, glass bead blasted and resoldered and pressure tested, and 2k black painted.
They would be show quality and priced accordingly.
Shipping from the Netherlands would be about +25 euro. Pm me for details.
Erik
Click to expand...
Thanks Erik. Show quality is not in my vocabulary, lol. I’m trying to get the coupe back on the road first, the try to pretty her up…
I will definitely keep your access to quality in mind.
Cheers sir.
 
eriknetherlands said:
I have 4 old brass overflow tanks which are likely leaking.
I can get them desoldered, glass bead blasted and resoldered and pressure tested, and 2k black painted.
They would be show quality and priced accordingly.
Shipping from the Netherlands would be about +25 euro. Pm me for details.
Erik
Click to expand...
Hello Erik,
Greetings from Vermont USA. Do you have any brass overflow tanks remaining?
Jerry
 
Cores or ready to install?

Don’t forget the plastic one is available and has never really been a problem!
 

Attachments

  • IMG_9553.jpeg
    IMG_9553.jpeg
    613.1 KB · Views: 47
Last edited:
RichenFamous said:
Good day folks,

I have a 1972 3.0CSi and am hunting for the following driver or better (will consider all since condition is in the eye of the beholder) quality parts:

Needs:
Fuel tank
Coolant overflow tank
View attachment 200226
Rear fog light housing and red lens
View attachment 200227
Rear seat (only driver side needed)
Rear script (3.0 + CSi)

Wants:
Trunk boards
Rear under bumper/bumperettes

Please PM pics and price! PayPal ready. Located in the Sacramento area.

Also have e3 and 2002 parts to trade if that interests you.

Cheers,
Rich
Click to expand...
did you find a gas tank? I might still have one from a 72 (not csi)
 
the AC-one is much shorter at the top, as if needs to accommodate the faceplate:

Dlc

Thread 'A/C faceplate and console position'

E9 friends,

I am reaching out for guidance in the finish of my ac retrofit :

What is the correct position of ac facdplate and center console gearshift cover?

Does the cover sit above the faceplate or are the parallel?
Is the cover shorter for ac than non-ac?

I am trying to fit this with my non ac car
Thank you
Dominik
 
Tanks are troublesome and expensive-

While Erik may have to ship them in, He likely can get them done less expensively than in California.

It’s a matter of time and materials
 
Are you still looking for the coolant overflow tank? I have the original from a '72 3.0 CS. It needs re-soldering but is otherwise in good condition.

Pricing is negotiable, prefer local pick up in Berkeley.
 

Attachments

  • overflow tank.jpg
    overflow tank.jpg
    68.4 KB · Views: 26
Last edited:
I'm not sure what you mean by rear under bumper/bumperettes, but I have the rear bumper assembly from my e9 (damaged, unfortunately). Also have one bumperette (?) in good condition.

I have other odds and ends as well, which you can review in my post dated Oct 20, 2025. Cheers
 

Attachments

  • rear bumper.jpg
    rear bumper.jpg
    87.8 KB · Views: 22
  • 20261022_103207.jpg
    20261022_103207.jpg
    270.7 KB · Views: 18
Last edited:
You must log in or register to reply here.
Back
Top