WTB - Fine spline driveshaft coupling, off the late sideloader, used in late E12, early E24.

ok, I will wait till I get it, but not about part value, as much about the forum and advice value!!

Am about to order the drexler lsd unit, have accumulated all the other parts required.

If I lived in the USA, would be sending it to you to build, but shipping, and follow ups if any issues, prohibit that unfort.
 
Ok- 27 teeth
counted 3 x
opening 31.5
at splines 30.7

let me know
 
lets do it... at worst it is off an e30, 168mm diff.. this uses the same collar nut, and the pinion seal has the same inner diameter, as the sideloader.. so pinion shaft is identical to the 188mm diff.. where is may be wrong is overall depth (not fixable) , and the dust cover diameter may be smaller (that can be swapped).. but optically the depth looks right..

Please let me know the ship cost etc etc,, maybe we take this to a one on one chat... Cheers..

Mike
 
When SFDon asked about counting the teeth, I thought he meant in the front line off the All Blacks doing the Haka, which no doubt will be less than when those guys started out in the sport.
With the follow up I see he means to calc the gear ratios.
 
You must log in or register to reply here.
Back
Top