WTB Oil Pump

[Peter Coomaraswamy]

11411278386 is the part number. It looks like the PO stripped the threads on the hub that the sprocket attaches to and I have heard nightmares about failure after rebuilding these things. Since I already have too much $ in this engine I figured I would like to get a decent oil pump. Anyone out there have on ? Pretty please.
http://www.realoem.com/bmw/enUS/par...5CSi&mg=11&sg=30&diagId=11_0485&q=11411278386
Thanks

 

[aearch]

https://parts.bmwofsouthatlanta.com...=1974&ukey_category=17306&ukey_driveLine=6494
OUCH
http://www.rogerstii.com/bmw-3-0cs-633csi-oil-pump/
http://www.data.bmrparts.com/bmwparts/392.html
PETER CALL THESE GUYS AIN SCACRAMENTO
IVE BEEN GOING THERE FOR 40 YRS
a great salvage place
they actually had a few coupes years ago

 

[BuzzBomb]

It would probably be easier to look for any good M30 oil pump, and swap your pump pick-up onto whatever good pump you find (in case it isn't from a '70s car with a center sump).

 

[BuzzBomb]

Also, there are only two moving parts in an M30 oil pump. There's no reason for a failure when rebuilding them, unless you reassemble it wrong, which is nearly impossible. Any "nightmare" that you may have read about is pretty much 100% user error. Replace the center shaft, rotor, and the center plate if it's scored, and you basically have a new pump.

 

[Simufly]

Here you go
http://www.ebay.co.uk/itm/BMW-3-0CS...273201?hash=item41be482471:g:jOUAAOSw4CFYqGf0

 

[BarryG]

Peter
I have a m10 pump, I'm sure that it's usable . You would have to take it apart and put your pickup on the m10 rotor part.

pm you

 

[WISE9UY]

I will be parting out my 72 3.0 motor. Let me know. I will be out on vacation for a week though with limited access to internet.

 

[Ohmess]

Hey Peter - I have one. Let's chat.

 

[Peter Coomaraswamy]

Hi Chris- sent you a text about the vintage, I'll be in the office tomorrow and we'll connect.

 

[Ohmess]

All boxed up, will go out tomorrow.