WTB or help with part #, floor plugs

[mark99]

On the floor there are 4 plugs about 1" x 2"
I can't seem to find them on the dealer or WN website
Can someone point me to them? (part number)
If they are NLA, does anyone have any to part with?
There are 2 shapes, I need the atypical one and 2 of the others

Still looking for a little of the original blue / grey carpet

 

[eriknetherlands]

Hi mark. Do you mean plastic plugs? If so there are 3 kinds of plugs in the interior floor. 1 rectangular, 1 oval, and the other are circular; i believe 38mm.

I have no partnumbers though they are searchable.
The round ones are available at the dealer, but are plastic-isch flimsy and not like original more solid rubber.

Report back please if you find out the availability and quality of the oval and rectangular ones.
Erik.

Verstuurd vanaf mijn SM-G800F met Tapatalk

 

[Bert Poliakoff]

Whoops. hit return by accident

 

[mark99]

Unfortunately my car is not here so I can't go out and look at it, forgot to get a photo
The ones I remember and am asking about are 'oval' and 'rectangular'
If I remember correctly, there where 3 oval and one rectangular
Maybe there are circular ones also
If I have this right,
I need 2 oval and the rectangular, there is one of the oval remaining

 

[HB Chris]

The only section in the parts book with plugs is 41/5. It shows (4) of 51 71 1 800 465 which looks to be oval and (4) each of 61 13 8 560 584 and 41 12 5 676 192.

 

[Stevehose]

Here's a pic I took of my floor plugs including the small round rocker plugs when I redid my floor insulation.

 

[mark99]

Steve, those are the ones, thanks
But probably not important, I can just glue something over the holes if I can't get the plugs
51 71 1 800 465 might be the oval, but NLA

 

[Markos]

Mark,

If you are willing to model them according to Steve's dimensions, I'll print and test

 

[Stevehose]

Unfortunately they're now under dynamat and carpet but hopefully someone can find some based on the pic and measure.

 

[Markos]

Il check my project car to see where left. My floor panels are original.

 

[mark99]

I have one of the oval ones, no rectangular one
Not sure if they would be worth modeling and printing, but I could / would do it
Probably a piece of sheet metal glued over the hole would be just as good

 

[restart]

You'd be surprised at the variety blind plugs your local auto parts place probably has in stock.
Or if you have the patience for online shopping the possibilities are endless

https://www.mcmaster.com/#snap-in-plugs/=198e4sv

https://www.heyco.com/Hole_Plugs/