WTB: Parts for E9, Doors and Windshields

RemyHou

Member
Messages
29
Reaction score
4
Location
Long Beach
Good morning everyone,

I just purchase a shell, trying to get the title for it. I'm located in Long Beach, California.
I'm looking for the windshield, front and rear. Looking for the complete door, passenger and driver. Looking for the rear window as well, passenger and driver side.
Any leads is really appreciated, thank you.
 

Attachments

  • 20250824_092837.jpg
    20250824_092837.jpg
    491 KB · Views: 90
  • 20250824_092846.jpg
    20250824_092846.jpg
    620.4 KB · Views: 86
  • 20250824_092856.jpg
    20250824_092856.jpg
    482 KB · Views: 78
  • 20250824_092851.jpg
    20250824_092851.jpg
    584.6 KB · Views: 83
  • 20250824_092910.jpg
    20250824_092910.jpg
    638.3 KB · Views: 91
By the look of it, you need a lot more!
My advice would be to buy a complete car with bad body. Then you're 95% covered on the parts.

Sorry, my stock pile of parts is fairly limited. A set of original CSL wheels and some bodywork. No small stuff.
 
Europe can only dream of such body parts donors (including another E9, visible in the 2nd row).

Another R.I.P E9 ... probably gone forever from the roads.
 
Europe can only dream of such body parts donors (including another E9, visible in the 2nd row).

Another R.I.P E9 ... probably gone forever from the roads.
I got another E9 but only the front and rear clip.
 

Attachments

  • 20250824_093042.jpg
    20250824_093042.jpg
    277 KB · Views: 53
  • 20250824_093030.jpg
    20250824_093030.jpg
    399.4 KB · Views: 58
I just put in new front window and rubber. I have old glass and rubber. The front window has a small crack on the driver side lower corner that is still solid and doesn’t interfere with visibility at all. The rubber seal is in good shape except for a 3” section that has a tear in the center where glass goes, that possibility can be sealed with black chalk? While definitely not ideal could be better than nothing. I am open to letting them go. They packed in the box from my new glass. The new window and seal was nearly $1,500 with shipping and tariffs. Theses are a possible low cost option.
 

Attachments

  • IMG_3860.jpeg
    IMG_3860.jpeg
    508.1 KB · Views: 5
  • IMG_3858.jpeg
    IMG_3858.jpeg
    455.5 KB · Views: 6
I have all new glass and seals available still in wooden crate from Wallothnesch and also have new seals.
Maybe rent a van and drive to Alameda to pick up?

Clear or green?
 

Attachments

  • IMG_4140.jpeg
    IMG_4140.jpeg
    655.4 KB · Views: 6
I just put in new front window and rubber. I have old glass and rubber. The front window has a small crack on the driver side lower corner that is still solid and doesn’t interfere with visibility at all. The rubber seal is in good shape except for a 3” section that has a tear in the center where glass goes, that possibility can be sealed with black chalk? While definitely not ideal could be better than nothing. I am open to letting them go. They packed in the box from my new glass. The new window and seal was nearly $1,500 with shipping and tariffs. Theses are a possible low cost option.
What are you asking for them?
 
Back
Top